6 Pool Cleaning Tips That You Need to Try Right Now
- Written by NewsServices.com

If you have been looking for pro tips on how to maintain your pool and keep it in great condition, then you have come to the right place. Follow these tips to keep it looking sparkling and fresh.
Remove debris
The fastest way of removing debris from the surface of the water is through skimming. When debris sinks, it is not only harder to remove, but also assists algae to thrive. When the debris stays in the water for too long, it will begin to decompose and cause bad odours. You should skim everyday and wash the skimmer baskets afterwards.
Throw a tennis ball into the water
This is a very cheap and effortless trick that is known to work. When you throw a tennis ball into the water, it will absorb all the oils inside that come from suntan lotions, hair oils, makeup, sweat and body oils. If you don’t remove the oils, they will continue to accumulate and cause the water to look cloudy. They will also reduce the free chlorine levels.
Maintain it regularly
The swimming pool cleaner should thoroughly scrub the walls and floors at least once a week. Begin by brushing the tile-nile, walls and surfaces to reduce the build-up of mineral deposits and algae. Use a stiff brush on plaster and concrete surfaces and a soft brush on tiles, vinyl or fibreglass. Proceed to vacuum the surfaces and wash the pump basket when you’re done. Finish by backwashing and rinsing the sand filter.
Check and maintain the water’s chemical balance
During the hot summer months, you should check and adjust the chemical levels at least twice a week. The PH level ranges from 7.4 to 7.6 and the chlorine level ranges from 1-3 ppm.
Shock the water
Nitrogen and ammonia compounds can build up in the water over time and interact with chlorine to produce chloramines which causes cloudy water. To eliminate the chloramines, you should shock the water. Shocking is adding a large dose of chlorine to the water temporarily to eliminate bacteria. The best time to shock the water is at dusk so the chlorine won’t be degraded by ultraviolet sunlight.
Use a pumice stone
If there is serious growth of algae on the floor and regular brushing can’t remove them, you should use a pumice stone to rub the area. A pumice stone is strong enough to remove algae.
During maintenance, you should skim the surface to remove debris, use a tennis ball to soak in the oils, scrub the walls and floor, adjust the chemicals accordingly, shock the water to kill bacteria and use a pumice stone to remove the tough algae stains. When you follow these tips, you will make your water safe for use.